Home Categories Send inquiry

News

High Frequency Welding Finned Tube

Sprial Welding Finned Tube High frequency welded spiral finned tubes are generally used for petrochemical industry and mostly installed on the convection sections of fired heaters, waste heat boilers, economizers, air preheaters, and heat exchangers involving the transfer of heat from a hot ... Read More

U Bend Heat Exchangers Tube

Applications U Bend Tubes for Heat Exchangers applied mostly in oil & gas plants, chemical & petrochemical plants, refineries, power plants, renewable energy plants. U Bending Tube Standard and Materials ASTM A179/ ASME SA179; ASTM A213/ ASME SA 213, T11, T22, T22, T5; ASTM A213... Read More

Wrinkle Finned Tube For Shell And Tube Exchanger

Fin Materials: Aluminum, Copper Tube Materials: No limits Fin Thickness: Min: 300 µ Max: 800µ Fin Height:0.5″ to 0.75″ The Wrinkle Fin attachment is a surface variation to the Edge Tension fin tube. This enhancements breaks up the air to enhance heat transfer. It uses symmetrical waves in the ra... Read More

LL Spiral Type Carbon Steel Tube Aluminum Fins For Heating Radiators

Bare tube general material: Aluminum,Copper, Alloy, Carbon Steel, Stainless Steel. Bare tube OD: 16-63mm. Fin general material: Copper, Aluminum. Fin pitch: 2.1-5.0mm. Fin height: <17mm. Fin thickness: 0.4mm. LL-type finned tube, the tube material is steel tube or stainless steel tube, the fi... Read More

Aluminum Heat G Type Embedded Fin Tube For Air Cooler

Tube: Carbon steel, Alloy steel, stainless steel and dual-phase steel Fin: Aluminum/Copper, Al1060/1070/1100, etc Bare tube OD: 16-63mm. Fin general material: Copper, Aluminum. Fin pitch: 2.1-5.0mm. Fin height: <17mm. Fin thickness: 0.4mm. G fin tube consists of aluminum fin strip that is mec... Read More

L Finned Tube The Thermal Efficiency Higher

The strip material is subjected to controlled deformation under tension giving the optimum contact pressure of the foot of the fin onto the base tube thus maximising the heat transfer properties. The foot of the fin considerably enhances the corrosion protection of the base tube. Bare tube genera... Read More

KL-type Finned Tube Is Also Called The Knurling Finned Tube

KL finned tube Bare tube general material: Copper, Alloy, Carbon Steel, Stainless Steel Bare tube OD: 16-63mm Fin general material: Copper, Aluminum Fin pitch: 2.1-5.0mm Fin height: <17mm Fin thickness: ~0.4mm Manufactured exactly as the’L’ finned tube except that the base tube is... Read More

Studed Fin Tube Can Improve The Heat Transfer Coefficient Of Flue Gas Side

Bare tube OD:48-124mm Studded Tube (Pin tube) Studded tube is also known as the head tube screw ribbed tube. Studded tube is more widely used in the petrochemical industry. Especially, in order to strengthen the heat transfer effect in the outside of the tube, Studded tube is also used in heat tr... Read More

The Advantages Of HF Spiral Welding Fin Tube

Bare tube general material: Alloy, Carbon Steel, Stainless Steel Bare tube OD: 16-219mm Fin general material: Alloy, Carbon Steel, Stainless Steel Fin pitch: 3-25mm Fin height: 5-30mm Fin thickness: 0.8-3mm High frequency welding spiral fin tube High frequency welding spiral fin tube is a new k... Read More

Wide Range Of Uses For H And HH Type Fin Tube

Bare tube general material: Alloy, Carbon Steel, Stainless Steel Bare tube OD: 25-63mm Fin general material: Alloy, Carbon Steel, Stainless Steel Fin pitch: 8-30mm Fin height: <200mm Fin thickness: 1.5-3.5mm H fins pipe (square finned tube) Square finned tube also called H fins is made for r... Read More

Carbon Steel,Copper,Stainless Steel U-bend Tube

Bare tube general material: Carbon Steel, Copper, Stainless Steel Bare tube OD: 16-38mm As the both ends fixed on the same tube sheet, the shell and the tube are separated so the U-type heat exchange can not thermal expanse, and the tube bundle can free stretch out and draw back, and cannot produ... Read More

String Type Fin Tube (Elliptical)

Bare tube general material: Copper, Aluminum, Carbon Steel, Stainless Steel Bare tube OD: 25-38mm Fin general material: Copper, Alloy, Aluminum, Carbon Steel, Stainless Steel Fin pitch: 2.1-3.5mm Fin height: <20mm Fin thickness: 0.2-0.5mm String Type Finned Tube (Elliptical) Elliptic finned ... Read More
12 Next > >> Page 1 / 2